manualshive.com logo in svg

Belden Miranda NV9640A, User Manual

The Belden Miranda NV9640A user manual is a comprehensive guide designed to assist users in understanding and operating this exceptional product. It is available for free download from manualshive.com, ensuring a hassle-free experience and empowering users with all the necessary information to optimize their use of this remarkable device.

Share
Download
background image

93

A

Acquiring IP address (message)  . . . . . . . . . . . . . . . 11–12, 73
Acrobat usage

bookmarks  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1
hyperlinks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1
navigating and searching  . . . . . . . . . . . . . . . . . . . . . . . . .  1

Add control panel (button) . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Add HW panel (page) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
AES (Audio Engineering Society)  . . . . . . . . . . . . . . . . . . . . . 91
AES/EBU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Africa, contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Agreement, license  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii
Alphanumeric display . . . . . . . . . . . . . . . . . . . . . . . 5, 13, 47, 60
Americas, contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Asia, contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Auto-fill options

destination categories  . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
destination devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
from category  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
manually fill devices  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
manually ordered buttons  . . . . . . . . . . . . . . . . . . . . . . . 33
salvos  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
source categories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
source devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
starting with . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Automatic data routing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Automatically generated lists  . . . . . . . . . . . . . . . . . . . . .56, 58

B

Back (button) . . . . . . . .4–5, 18, 25, 32–33, 51, 54, 56, 58, 61
Bookmarks, Acrobat  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1
Boolean

expressions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
operators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Breakaway  . . . . . . . . . . . . . . . . . . . . . . . . 4, 8, 27, 52, 64, 67, 91
Breakout cable (WC0053)  . . . . . . . . . . . . . . . . . . . . . .  7, 10, 89
Brightness, LCD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4, 60, 83
Broadcast (button) . . . . . . . . . . . . . . . . . . . . . . . . .25, 54, 65, 68
Broadcast data routing  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8
Broadcast mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Broadcast routes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Button

add control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
back . . . . . . . . . . . . .4–5, 18, 25, 32–33, 51, 54, 56, 58, 61

broadcast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25, 54, 65, 68
cancel  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72–73
category . . . . . . . . . . . . . . . . . . . . . . . . . . .24, 26, 49, 54–55
chop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26, 55, 70
clear preset  . . . . . . . . . . . . . . . . . . . . . . . . . 4, 18, 26, 43, 56
default state  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26, 56
destination  . . . . . . . . . . . . . . . . . . . . . . . . . . . 26, 49, 54, 56
destination lock . . . . . . . . . . . . . . . . . . . . . . . 22, 26, 56, 66
destination protect . . . . . . . . . . . . . . . . . . . . 22, 26, 57, 66
edit panel configuration . . . . . . . . . . . . . . . . . . . . . . . . . .15
exit  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71
finish  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
forward . . . . . . . . . . . . .4–5, 27, 32–33, 51, 54, 56, 58, 61
free source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8, 27, 57
global navigate  . . . . . . . . . . . . . . . . . . . . . . . . . . .27, 54, 61
hold  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7, 22, 27, 58
information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27, 60
LCD control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72
level map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27, 49, 58
menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4, 7, 11, 27, 60, 70
name set toggle . . . . . . . . . . . . . . . . . . . . . 6, 27, 60, 67–68
navigate  . . . . . . . . . . .4, 17–18, 25, 28, 32, 34, 47, 54, 61
next  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
page down  . . . . . . . . . . . . . . . . . . 4, 13, 17, 19, 28, 48, 61
page up  . . . . . . . . . . . . . . . . . . . . . 4, 13, 17, 19, 28, 48, 61
panel  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72
panel lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28, 62
preset release . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28, 62
previous source . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8, 28, 62
quick source  . . . . . . . . . . . . . . . . . . . . . . . . 8, 28, 38, 62, 67
revert to saved . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16, 18
salvo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29, 49, 63
save  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16, 18, 72–73
save preset  . . . . . . . . . . . . . . . . . . . . . . . . . . 4, 8, 21, 29, 63
source  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29, 49, 54, 64, 67
source is master . . . . . . . . . . . . . . . . . . . . . . . 22, 30, 65, 68
source/destination . . . . . . . . . . . . . . . . . . . . . . . . . 8, 30, 64
take  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18, 30, 49, 62, 65
undefined  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17, 30, 65
user  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71
VFD/SEL toggle  . . . . . . . . . . . . .23, 30, 36, 49, 61–62, 65
virtual levels contract  . . . . . . . . . . . . . . . . . 30, 50, 52, 66
virtual levels expand  . . . . . . . . . . . . . . . . . . 31, 50, 52, 66
X-Y display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49, 57
XY/MD mode  . . . . . . . . . . . . . . . . . . . . . . . 4, 31, 48, 66–67

Button captions . . . . . . . . . . . . . . . . .24, 31, 48, 50, 55–56, 64
Button classes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23, 54
Button color  . . . . . . . . . . . . . . . . . . . . . 4, 18, 24, 48–49, 55, 89
Button definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17, 23

Index

Summary of Contents for Miranda NV9640A

















































































































Reviews:

No comments

Related manuals for Miranda NV9640A

Unipulse F160 Operation Manual preview
F160
Brand: Unipulse Pages: 99
Accutrol VTS Installation & Operation Manual preview
VTS
Brand: Accutrol Pages: 25
Mainpine EPC Operating Instructions Manual preview
EPC
Brand: Mainpine Pages: 16
Danfoss AFP Series Installation Manual preview
AFP Series
Brand: Danfoss Pages: 20
Caen V793 Technical Information Manual preview
V793
Brand: Caen Pages: 20
Parker ER Series Maintenance Instructions & Parts List preview
ER Series
Brand: Parker Pages: 44
hager coviva Smartbox TKP100A Quick Manual preview
coviva Smartbox TKP100A
Brand: hager Pages: 4
Vag ZETA Operating And Maintenance Instructions Manual preview
ZETA
Brand: Vag Pages: 12
RAKwireless RAK3172 User Manual preview
RAK3172
Brand: RAKwireless Pages: 6
Ban Seok BV-322M User Manual preview
BV-322M
Brand: Ban Seok Pages: 9
KaMo Pearldex Series Manual preview
Pearldex Series
Brand: KaMo Pages: 2
Allen-Bradley ArmorBlock 1732E-16CFGM12R Installation Instructions Manual preview
ArmorBlock 1732E-16CFGM12R
Brand: Allen-Bradley Pages: 20
Integral 1502 LT Repair Instructions preview
1502 LT
Brand: Integral Pages: 7
select solar EPHC 10A Instruction Manual preview
EPHC 10A
Brand: select solar Pages: 2
FOR-A HVS-2000-2SI Installation Manual preview
HVS-2000-2SI
Brand: FOR-A Pages: 6
turck CODESYS 3 Getting Started preview
CODESYS 3
Brand: turck Pages: 45
Thermo Scientific CC58114PBC Installation And Operation Manual preview
CC58114PBC
Brand: Thermo Scientific Pages: 68
UUGear Witty Pi 3 User Manual preview
Witty Pi 3
Brand: UUGear Pages: 38

Brands by name

Popular brands

Load more brands