Technical Manual
LioN-Link DeviceNet
Subject to change without notice!
Version 1.0 / June 2010
Page 26 of 27
8.
Technical data
8.1.
General data
Degree of protection
IP 67 (only with screwed connectors)
Ambient temperature
-10°C / +60°C
Weight
200 g
Housing material
PBT
Vibration resistance
15 g / 5–500 Hz
Shock resistance
50 g / 11 ms
Torques:
Fastening screw M4
M8 connectors
M12 connectors
1,0 Nm
0,3 Nm
0,5 Nm
8.2.
Technical data of the bus system
Protocol
DeviceNet
EDS-file
00_0940 DSL 601.eds
Transmission rates
125 / 250 / 500 KBit/s
Setting of the transmission rate
Automatically during communication start.
Node address
Setting through rotary switches
Default address
1 to 63 dec.
63 dec, see chapter address setting
Vendor code
21 dec.
Product type
12 dec, Communication Adapter
Product code
98 dec.
Connections
M12-plug and M12-socket, 5-pole, A-coded (see pin assignments)
8.3.
Technical data of the power supply for the fieldbus interface
Rated voltage U
S
24 V DC
Voltage range
11–30 V DC
Current consumption
typ. 10 mA
Reverse polarity protection
yes
Operation indicator (U
S
)
LED green
Connection
via DeviceNet bus cable
8.4.
Technical data of the power supply for the system / sensors
Rated voltage U
S1
, U
S2
24 V DC
Voltage range
19–30 V DC
Current consumption
typ. 50 mA
Supply current per line
3 A
Reverse polarity protection
yes
Operation indicator (U
S1
, U
S2
)
LED green
Connection
M12-plug, 5-pole
see pin assignments
The power supply of the LioN-Link modules from the BusHead is limited to 3 A per Link line. It is absolutely necessary to connect both
power supplies of the BusHead.
See chapter 5.1 (pin assignments).
The reverse polarity protection functions only, if the power supplies of the system in each case are protected by
an overcurrent fuse (6 A, semi time-lag) and switched off in the case of a short-circuit after 10 to 100 ms at the
latest.
Attention!
A power supply unit with current control or a wrong protection leads to the destruction of the module in case of
reverse polarity.
