48
Specifications
Mechanical/Environmental
GPI Bolt Card
Inputs (Pins 1, 2, 3, 4, 5, 6, 7 and 8 on the DB-26 HD Data I/O connector. GND on pin9):
Voltage on Floating Input Pin: ..................... 3.3V ±2%
Input Voltage
for Remote Contact Activation: ................... ≤1Vdc
(typically grounded through GPI contacts;
TTL/HCMOS level drive also suitable)
Input Resistance when pulled
to ground (GPI output activated): .............. 5kΩ ±1%
Output Contact Pairs (Pins 11&19, 12&20, 13 &21, 14&22, 15&23, 16&24, 17&25 and 18&26)
Contact Format: ................................................ 1 Form A (non-activated condition)
Contact Resistance: .......................................... 100mΩ
Switching Voltage: ........................................... 125Vac, 110Vdc maximum
Contact Rating: .................................................. 2A @ 30Vdc,
0.3A @ 125Vac (resistive load)
Maximum Toggle Rate: ................................... ≈5Hz
Breakdown Voltage:
Between Open Contacts: ......................... 750Vrms for 1minute
Between Contact and Coil: ...................... 1500Vrms for 1 minute
Format Bias Output (Pin 10 on the DB-26 HD Data I/O connector):
Output Voltage: ................................................. 5Vdc ±5%
Output Current Limit: ...................................... 300mAdc maximum
Note: The “Format Bias” pin is provided to supply a DC voltage source for low power
loads that may be switched by the GPI output contacts, such as LED’s for Tally use etc.
