manualshive.com logo in svg

Belden Grass valley T2 4K Series, Service Manual, Page: 37 / 101

Share
Download
Belden Grass valley T2 4K Series Service Manual Download Page 37

September 1, 2019

T2 4K Series Service Manual

37

Media drive RAID volume maintenance

• Intel (R) Rapid Storage Technology application screen will appear.

3. Click the device with the "!" mark in "Storage System View" at the right-pane.

• The numbers in "Port 1", "Port 2"...etc. are their drive numbers. The drives are 

sorted in the order of "SATA 1", "SATA 2" ...

• For a drive running normally, "Normal" is shown for "Status" of "Manage 

Disk" at the left-pane, and for a failed drive, "Missing" is shown.

• If there is any failed drive, shut down the T2 as described in 

"Exiting the 

maintenance mode to shut down" on page 21

, then replace the failed drive as 

described in 

"Removing data HDD/SSD" on page 69

. After the drive has been 

replaced, rebuild the RAID volume as described in 

"Building the RAID 

volume" on page 38

.

Summary of Contents for Grass valley T2 4K Series






































































































Reviews:

No comments