59
MV-831
User Manual
Outputs
Router Outputs
Multiviewer Head Display Outputs
Table A-5:
Router Video Outputs
Number and type
24-off HD-BNC Coax, re-clocked
Standards supported
SMPTE-259M 525 and 625 SD-SDI
EN50083-9 DVB-ASI (See
Note 1
)
SMPTE 292M 720p and 1080i HD-SDI
SMPTE 424M 1080p 3G-SDI
Impedance
75 R
Data rate
3 Mb/s to 3 Gb/s. Standard video rates re-clocked, all other rates
auto-bypassed.
Return loss
>15 dB, 10 MHz to 1.5 GHz
>10 dB,1.5 GHz to 3 GHz
Amplitude
800 mV p-p ±10%
Rise/Fall time
<90 ps @ 3G
<180 ps @ HD
<650 ps @ SD
Timing Jitter
<0.25 UI @ 1.5G and 3G
<0.15 UI @ SD
Alignment Jitter
<0.15 UI @ 1.5G and 3G
<0.1 UI @ SD
DC offset
0 V ±0.5 V
Note 1: ASI and MV-831:
The Sirius 830 router can switch ASI signals and the router inputs
and router outputs of the MV-831 module pass ASI signals. And the
presence of ASI is reported to the router controller.
The MV-831 fully supports this ASI router functionality.
However, the monitoring ‘MV block’ on the MV-831 module only
supports baseband video signals, i.e. SD/HD/3G signals, and
not
ASI.
If an ASI signal is fed to the ‘MV Block’, then the MV-831will report a
signal loss at the ‘MV block’.
Table A-6:
Multiviewer Head Display
Outputs
Multiviewer Head
Display Outputs
4 to 12 SDI video outputs. HD-BNC Coax or Fiber.
• Outputs 1 to 4 on standard MV-831.
• Outputs 5 to 12, with MV-831 licenses.
Optional
SFPs:
• Dual coax SFP.
• Dual Fiber SFP.
• Single HDMI SFPs. (Up to 6 x HDMI outputs, 1080p)
