28
MV-831 Hardware Modules
Connectors
The MV-831 rear connectors relate to either the module’s router video input/output function or
to the module’s multiviewer function:
• 24 router video inputs and 24 router video outputs.
• Up to 12 multiviewer head display outputs from the MV-831:
• 2 outputs per “SDI coax” or “fiber video” SFP module; or
• 1 output per HDMI video SFP module.
• Ethernet ports for multiviewer video wall control.
• LTC and GPIO multiviewer connections.
The multiviewer head display outputs come from video SFP modules fitted into the SFP cages
on the MV-831 Rear Panel. SFP blanking plugs must be fitted if an SFP is not fitted into any of
the rear cages.
Connectors
Table 2-2 describes each connector type.
Table 2-2 MV-831 Multiviewer -RP Rear panel Connectors
Connector
Description
Router Input Function:
Router Video Inputs
24-off HD-BNC.
Router Output Function:
Router Video Outputs
24-off HD-BNC.
Multiviewer Function:
Multiviewer Head Display
Outputs 1 to 12
Multiviewer video wall outputs.
6-off SFP cages for SFP modules [See
Note 1
]:
• 2-off SDI Coax outputs per SFP; or
• 2-off SDI Fiber outputs per SFP; or
• 1-off HDMI output per SFP.
Multiviewer
Monitor Connectors 1 and 2
Not currently used
USB connectors A and B
Not currently used
LTC & GPIO Connector
Screw terminals.
See
on page 33 for pinout details.
Note:
An LTC signal can also be sourced from the
host router. This is selectable via the MV-831
module’s RollCall templates. See ‘MV-8 Series
Multiviewer’ user manual for the setting.
1G Ethernet Ports 1 and 2
2-off 1 Gbps, SFP+ Ethernet sockets, RJ45
Note 1
: SFP blanking plugs must be fitted if no SFP is present.
