39
MV-831
User Manual
Insert the SFP video modules into the SFP cages on the MV-831 Rear Panel.
The modules slide in until there is an audible click.
Start by filling the SFP cage for output pair 1 & 2, then 3 & 4 etc. see Figure 3-4.
Fill any remaining slots with SFP blanking plugs (SFP-BLANK).
SFP module removal, if required, is achieved by operating a small lever or lever-bar on the SFP
module before sliding the SFP video module out of its cage.
Fig. 3-3: SFP orientation for fitting into MV-831 Rear Panel SFP cages
Fiber SFP
SFP cages
SFP blanking plug
Note the orientation of the SFPs in this figure.
Black plastic SFP protective dust cap
Coax SFP
Fig. 3-4: MV-831 outputs 1 to 12
1 & 2
5 & 6
3 & 4
7 & 8
11 & 12
9 & 10
