26
Environment and Location
Ancillary Panels
Half 19" Rack Mount
The mounting brackets may also be set to a vertical position to fit the unit into a 19" rack,
the unit is 1RU high and only half 19" wide, so will need to have support from below using a
rack mount tray, as only one side of the unit can be secured to the rack sides.
19” Rack Mount using two Mav Remote units with a Joining Plate
Two Mav Remote units can be joined together using a joining plate, which allows the units
to span across the full width of the rack and fasten to the rack without the support of a rack
tray.
Note:
The Mav Remote must have ventilation to allow cooling, and must
not be installed into an enclosed space.
The unit is secured to the
rack on one side only.
Support for the unit
with a rack tray
The units are joined using a “Joining Plate”
