23
iTX Playout Appliance 2
Installation and Service Manual
Removing the Chassis Cover
You can access the internal components of the iTX Playout Appliance 2 by removing the
cover on the top side of the chassis.
To remove the top cover from the chassis:
1 Remove the 2 Phillip screws from the rear of the cover.
2 Press the two release buttons along the front of the cover.
3 Slide the cover towards the rear.
4 Lift the cover upwards to completely remove it from the chassis.
WARNING
- Power Disconnection
The system must be disconnected from all sources of power and the
power cord removed from the power supply module(s) before
accessing the chassis interior to install or remove system components. This
unit has more than one power supply connection. All connections must be
removed to de-energize the unit.
