Belden grass valley IQSDA41 Series User Manual Download Page 39

Page: 39 / 51

IQSDA41/42

User Manual

Logging - Misc

The

Logging - Misc

page displays current log information regarding the unit’s basic

parameters.

The following options are available. Enable check boxes to activate logging.

Log Field

Description

SN=

Reports the module serial number, which consists of an

followed by eight digits.

Note

: this cannot be deselected.

OS_VERSION=

Reports the operating system name and version.

BUILD_NUMBER=

Reports the build number.

HARDWARE_VERSION=

Reports the hardware version number.

HARDWARE_MOD=

Reports the hardware modification number.

ROL_STATES=

Reports the RollCall status. Valid values are:

•

FAIL:

where

is the RollTrack index or indices which are

failing.

•

Disabled

LAST_RECALLED_MEMORY=

Reports the last memory to be recalled.

SLOT_WIDTH=

Reports the slot width.

SLOT_START=

Reports the slot start number.

Summary of Contents for grass valley IQSDA41 Series




















































Search results

Summary of Contents for grass valley IQSDA41 Series

Reviews:

Brands by name

Popular brands

Belden grass valley IQSDA41 Series, User Manual

Search results

Summary of Contents for grass valley IQSDA41 Series

Reviews:

Brands by name

Popular brands