manualshive.com logo in svg

Belden grass valley IQSDA41 Series, User Manual

Share
Download
Belden grass valley IQSDA41 Series User Manual Download Page 31

 31

Operation Using the RollCall Control Panel

This section contains information on using IQSDA41/42 modules with RollCall.

For help with general use of the RollCall application, open the user manual by clicking 

 

on the main RollCall toolbar.

Navigating Pages in the RollCall Template

The RollCall template has a number of pages, each of which can be selected from the 
scrolling list as shown. Right-clicking anywhere on the pages will also open a page view list, 
allowing quick access to any of the pages. 

Setting Values

Many of the settings within the templates have values, either alpha or numeric.

When setting a value in a field, the value, whether text or a number, must be saved by 
pressing the E

NTER

 key, or clicking the 

 

Save Value

 button.

Clicking an associated 

 

Preset Value

 button returns the value to the factory default 

setting.

Note:

The IQSDA41/42 will dynamically configure itself depending on user 

configuration and SFP options fitted. The RollCall control panel will change 
to reflect the current product configuration.
The pages shown in this section are for guidance and reference only, and 
may be slightly different to those on your module.

Pages 

List

Summary of Contents for grass valley IQSDA41 Series




















































Reviews:

No comments

Brands by name

Popular brands

Load more brands