manualshive.com logo in svg

Belden grass valley IQSDA41 Series, User Manual

Share
Download
Belden grass valley IQSDA41 Series User Manual Download Page 18

18

Introduction

IQSDA42

• Equalizes up to 60m at 12 Gbit/s, 80m at 3 Gbit/s, 180m at 1.5 Gbit/s, and more than 

350m at 270 Mbit/s when using Belden 1694A cable.

• Standards supported:

• 3G-HD to SMPTE 424M

• HD-SDI to SMPTE 292M

• SD-SDI to SMPTE 259M-C

• DVB-ASI

• 1310nm output wavelength.

• RollCall monitoring allows all signal paths to be managed.

IQSDA42

The IQSDA42 is a configurable single, dual or quad-channel SDI distribution amplifier for 
UHD-1 12 Gbit/s, HD 3 Gbit/s, 1.5 Gbit/s or SD 270 Mbit/s signals, providing up to 19 
equalized and re-clocked outputs of the input in a single width-package. Its 60m 12G, 80m 
3G, 180m HD input equalization performance coupled with excellent packing density make 
it ideal for signal-dense distribution applications.

Variants are available with 20 x BNC I/O (IQSDA4201-1B4), or 16 x BNC I/O + 2 x SFP I/O 
(IQSDA4200-1B4). See 

Order Codes

 on page 20 for more information.

Summary of Contents for grass valley IQSDA41 Series




















































Reviews:

No comments

Brands by name

Popular brands

Load more brands