Belden Grass Valley CopperHead 3404, User Manual

Page: 35 / 113

29
CopperHead 3404
User Guide
Area B - Audio Indicators
Fig. 4-16: Audio Indicators
LED Indicators to the left side of the label indicate signal paths from the Camera Unit to the
Base Station.The right side LEDs indicate signal paths from the Base Station to the Camera
Unit.
• 2: Audio Channel 1 & 2 - Monitors Program audio from Camera Unit to Base Station
and Return audio from Base Station to Camera Unit.
• 3: Intercom Channels 1 & 2 - Monitors Intercom audio from Camera Unit to Base
Station and from Base Station to Camera Unit
• 4: Time Code - Monitors the time code signal generated by the Camera coming to the
Base Station, and monitors the Base or House time code from the Base Station to the
Camera Unit
• 5: Ethernet - Indicates IP Data traffic to and from Camera Unit to and from Base Station
Area C - Video/Data Indicators
Fig. 4-17: Video/Data Indicators
• 6: HD/SD SDI Digital Video Signal - Monitors camera SDI video to Base Station and SDI
return video to the Camera Unit
• 7: VBS Signals 1-3 - The following are suggested uses of the three VBS signal paths.
• VBS - 1 Analog Video Signal - Monitors analog Camera video from the Camera Unit
to the Base Station and Return video to the Camera Unit from the Base Station
• VBS - 2 Genlock - Monitors Genlock signal (from Base Station to Camera)
• VBS 3 - Prompter - Monitors Prompter Feed (one way from Base Station to Camera
• 8: DATA 1/CCU Data - Monitors Camera Control Unit data or other Data to and from
Base Station and Camera Unit
• 9: GPI/Tally 1 & 2 - Monitors GPI and Tally signal activity to the camera. GPI/Tally 1
monitors any camera location originated GPI signals.