Belden Grass Valley CopperHead 3404, User Manual

Page: 25 / 113

19
CopperHead 3404
User Guide
Area A - Connector Panel
Fig. 4-2: Connector Panel
For additional information about the signals carried on these connectors, see Signal paths
in the CopperHead 3404 Transceiver System on page 10.
• 18: Time Code In (to Base Station) - provides feed of local camera time code or for the
provision of a master synchronization time code for all other cameras (typically from
Camera 1 and only if not master TC generator at base)
• 19: Time Code Out (from Base Station) - for time code synchronization of multi-camera
productions
• 20: VBS Out 2 (from Base Station) - typically used for Genlock/Black Burst from master
synchronizing source
• 21: VBS Out 3 (from Base Station) - typically used for Return Video to camera or for
Prompter feed
Area B - Camera Mounting Plate
Fig. 4-3: Two types of Camera Mounting Plates
V-Type Camera Mounting Plate Anton Bauer Camera Mounting Plate