GUIDE TO INSTALLATION AND OPERATION
26
| AMX-1901
Dynamics for 1 minute.
Click the
Dynamics for 1 minute
button to display the dynamics processing in the meters at the bottom of the panel for
a period of one minute
•
The right-hand portion of this section shows the output channels of the dynamics processor on level meters, as
found in the RALM panel.
•
The left-hand side shows approximately how much dynamic processing is being applied to the signal (by
amplitude) on a channel basis.
•
The example shown above is the result of substantial compression being applied to Channel 1
5.7 Audio Programs panel
The Audio Programs panel provides resources to define eight audio programs, and to specify the inputs for each
program.
Coding Mode:
Use the eight pull-downs to specify the coding of the programs
that you want to embed in the output. The options are:
Coding
Mode
Program Channels
Left Right Center LFE
Ls
Rs
1/0
X
2/0
X
X
3/0
X
X
X
3/0L
X
X
X
X
2/1
X
X
X
2/1L
X
X
X
X
3/1
X
X
X
X
3/1L
X
X
X
X
X
2/2
X
X
X
X
2/2L
X
X
X
X
X
3/2
X
X
X
X
X
3/2L
X
X
X
X
X
X
OFF
This program is not used
Figure 5.13 Dynamics for 1 minute display
Figure 5.14 Audio Programs panel
