GUIDE TO INSTALLATION AND OPERATION
AMX-1901 |
11
5 Remote control using iControl
The operation of the AMX-1901 may be controlled using Miranda’s iControl system.
•
This manual describes the control panels associated with the AMX-1901 and their use.
•
Please consult the iControl User’s Guide for information about setting up and operating iControl.
In iControl Navigator or iControl Websites, double-click on the AMX-1901 icon to open the control panel.
5.1 The iControl graphic interface window
The basic window structure for the AMX-1901 is shown in figure 5.1. The window identification line gives the card type
(
AMX-1901
) and the slot number where the card is installed in its Densité frame.
There are four main sections in the window itself, as identified in the figure:
Section 1.
The top section displays six icons on the left. These icons report different statuses such as card
communication status, input signal and reference signal format and statuses. In some instances, they relate to
conditions defined through parameters settings.
Icon # 1
2
3
4
5
6
Move the mouse over an icon and a status message appears below the icon providing additional information.
1
2
3
4
Figure 5.1 AMX-1901 iControl graphic interface window
