8
Development Kit for EES20 and EES25
Release 1.0 03/2012
1.3 Apply Power to the EES Baseboard
Connect the 18-32V DC (24V DC is recommended) power supply
directly into the development board’s DC power connector as seen in
Figure 1-1.
Figure 1-1: DC–Jack
1.4 Connect the Board
Using an Ethernet cable, connect the PC to any Ethernet port on the
EES Baseboard. The Ethernet port’s green LED should be “On” when
connected.
In addition to the Ethernet connection, the device also has a RS-232
serial connection to obtain Command Line Interface (CLI) access.
Figure 1-2 illustrates these connections.
You will find a detailed description of CLI in the "Command Line
Interface" reference manual.
