QUAD WAVE MITTER
™
20
Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681
1MANUL633
Installation
Cloth
5) Remove lower inside retainer pins from the lower drive arm.
6) Remove the lower drive arm.
7) Remove 1-
1/8” (29 mm) outside rack connector bolt.
8) Remove the bolt locate behind the shaft bearing of the follower rack.
Lower drive arm
(remove for cloth installation)
Upper drive arm
Pitman arm
Drive Rack
Follower Rack
Remove the bolt
located behind this
bearing for cloth
installation
(typical)
Outside collar
(anodized aluminum)
(typical)
Shaft bearing
(black urethane plastic)
(typical)
1-
1/8”
(29 mm) bolt,
(remove for cloth installation, typical)
Retainer pin
(remove for cloth installation, typical)
Mitter Wave
®
peg
(typical)
(View from in between the two racks)
Summary of Contents for Quad Wave Mitter
