BAIS-T™ CONFIGURATOR MODULE
1MANUL051
Belanger , Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681
25
Programming
Set-Up Pack/Opts (Set-Up Packages/Options), (Screen 5)
You will encounter 1 screen for each function. This is where you will setup your “Packages” and “Options”
As stated earlier, this is where you will group together the previously programmed Function into Packages
and/or Options.
From the 11 screens described earlier in this document, use the “ARROW” keys to select the “#5” screen. This
is the “Set-Up Pack/Opts” screen (shown below).
Press the <ENTER> key. You will be prompted to “Insert Operators Keyboard”. Remove the Programming
Keypad Overlay to expose the Operators Keypad Overlay. Once removed, press <ENTER>. The following
screen will appear:
Here you will establish the actual groups of functions that make up your “Packages” and “Options”.
•
Set: This displays the different Functions that have been previously programmed into the system. As you scroll
using the “ARROW” keys, the Input Station goes from Function to Function. As you come across a Function you
want to add to a given Package or Option, press the corresponding cell as explained below.
•
Pack: Packages to be added to a given group. Notice the 15 character positions. Each position correspond with
the pre-programmed Package Key (Program #1 through Program #15). On this line, you can enter “Zero’s”, “Plus”
symbols or “Minus” symbols. These represent the following: 0 = Do Not Activate With this Package, + = Activate
With this Package, - = Deactivate With this Package (also called “De-Select”, usually used for optional Tire Retract
or Titans).
•
Optn: The same rules apply to this “Options” line as the Package line.
•
The <Pkgs> and <Optns> are activated by pressing the corresponding cell on the Operators Module. See
corresponding manual for more details.
SET
: P/S 2 X 2
Pack
: +++000000000000
Optn
: 000000000000000
<Pkgs><Optns><Enter>
CAR WASH SET-UP
:
5. Set-up Pack/Opts
<Enter><Menu><Up/Dn>
Screen Key:
•
Line 1: Displays previously programmed Function. See
“bullet points” below
•
Line 2: Package items to be grouped together
•
Line 3: Option items to be grouped together
