manualshive.com logo in svg

BEKOMAT 32iU, Translation Of Original Installation And Operation Manual

Share
Download
BEKOMAT 32iU Translation Of Original Installation And Operation Manual Download Page 61

14.2  Disposal of operational materials and components

Ensure the following prerequisites are met before disposal:

Preparatory tasks

1.

The 

BEKOMAT

®

 

has been decommissioned.

2.

The 

BEKOMAT

®

 is disassembled.

3.

The 

BEKOMAT

®

 

is clean and free from all media residues.

Operating material / auxiliary material

EU waste code

Adsorption materials, filter materials, cleaning wipes and protective clothing 

- contaminated by oils or other hazardous substances

15 02 02

Adsorption materials, filter materials, cleaning wipes and protective clothing 
- with the exception of those classified by 15 02 02

15 02 03

Packaging - paper and cardboard

15 01 01

Packaging - plastic material

15 01 02

Electric and electronic devices with the exception of those covered by 
20 01 21, 20 01 23 and 20 01 35

20 01 36

Original installation and operation manual

BEKOMAT

®

 32iU

61 | 68

Summary of Contents for 32iU





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands