BEKOMAT 32iU, Translation Of Original Installation And Operation Manual

Page: 58 / 68

13. Dismantling
13.1 Warning notices
DANGER Pressurised system!
Danger of death or serious personal injury through contact with quickly or suddenly
escaping fluids or through bursting system parts.
• All work on the system must be carried out in the depressurised state and with the
system secured against unintentional pressurisation.
• Set up a safety area around the working area during all maintenance and repair work.
DANGER Electric voltage!
There is a danger of death or serious injuries as well as malfunction and device failure
following contact with components which are in contact with electric voltage.
• Only carry out maintenance and repair work on the product when it has been
disconnected and secured against being switched back on again unintentionally.
• Set up a safety area around the working area during all maintenance and repair work.
WARNING Insufficient qualification!
Insufficient qualification of the personnel carrying out work on the product and accessories
can lead to accidents, personal injury and damage to property as well as impair operation.
• All work on the product and the accessories may only be carried out by skilled technical
personnel - customer service.
13.2 Dismantling work
For dismantling work to be carried out, the following prerequisites must be fulfilled and the preparatory tasks must have
been completed.
Prerequisites
Tools Material Protective equipment
• Spanner or adjustable end wrench • No material necessary Always to be worn:
Preparatory tasks
1. Decommissioning has been completed.
2.
Depressurise the pressurised system or the respective system section and secure it against unintentional
pressurisation.
BEKOMAT
®
32iU Original installation and operation manual
58 | 68