BEKOMAT 32iU, Translation Of Original Installation And Operation Manual

Page: 31 / 68

Wrong Right Description / explanation
Ensure venting
• If the slope in the inflow is not sufficient or
there are other problems with the inflow,
install a venting line.
Discharge from pressurised pipes
• Divert the flow of gas to provide a deflecting
surface to discharge the fluid components in
the gas.
6.3 Assembly work
For assembly work to be carried out, the following prerequisites must be fulfilled and the preparatory tasks must have
been completed.
Prerequisites
Tools Material Protective equipment
• Spanner or adjustable end wrench • Sealants e.g. PTFE
• Feed line
• Drain line
• Hose, interior diameter
8 … 10 mm (0.31 … 0.39 in), Length
approx. 30 cm (1 ft)
Always to be worn:
Preparatory tasks
1.
Depressurise the pressurised system or the respective system section and secure it against unintentional
pressurisation.
Original installation and operation manual BEKOMAT
®
32iU
31 | 68