8
Parts identification of the washer
Preparation before washing
7
Adjust the adjustable foot to make
the washer be placed stable.
1
Adjustable foot (extend when
clockwise rotating and shorten
when counterclockwise rotating)
(Slightly incline the washer first and loosen the
adjustable foot knob. Adjust the adjustable foot so
as to ensure four corners of washer be steadily
contacted with the ground. Then tighten the
adjustable foot knob and lock it. If the ground is
obviously not flat, correction should be made on
the ground surface, otherwise the washer barrel
will incline and knock the cabinet)
Connect with to
power source.
3
4
Put in
clothes
and
suitable
amount of
washing
powder.
6
Install the water
inlet hose.
2
Turn on the
water supply.
Put down the drain
hose.
5
Note:
Before washing machine starts, user should fix
drain pump at the outlet place about 86-100cm
high to hang the pipe
.
Accessories
Water inlet hose assembly
Base cover
Self-tapping screw
Please refer to the real material as the attachment
Cold
(blue)
Hot
(red)
Name Of Parts
Before washing, please do take out coins,
keys and other hard goods, and zip up clothes
and barrel from damage.
！
NOTICE
tightly to prevent them
86~100 cm
Power line
Cabinet
Control panel
Top lid
Upper drain hose
Adjustable foot knob
Handle
Water inlet valve
Filter
support
Impeller
Washing powder area
Detergent
area
Summary of Contents for WTAU12AW
Page 1: ...WTAU12AW ...
