19
Technical specifications
Technical specifications
MADE IN CHINA
Malfunction display and solutions
When the washer is in trouble, please contact local service office or the sales service
department of our company and the customer should not dismantle the machine.
If the washer can not work normally, and the abnormal indication is shown in the digital
display window or the machine alarms, please check and correct them as follows.
Malfunction display and solutions
Overall dimensions
601X630X1000(mm)
Rated input power
600W
Motor rated input power
600W
Pump rated input power
45W
Water
volume
85L
R
ated
washing
capacity
12.0kg
Net weight
46kg
Rated voltage
Rated frequency
50Hz
Water pressure
0.1MPa~0.6MPa
Grade of waterproof
IPX4
Standard program water consumption
220L
220V~
20
Falut
Cause of fault
Indication
Alarm of the
buzzing sound
Drain Alarm
Alarm for
opening lid
Imbalance
Alarm
Water injection for about
1 hour, but do not reach
preset water level.
“E1”flares
“E2”flares
“E3”flares
“E4”flares
The buzzer goes
on buzzing for 10
seconds. If the
fault is not solved,
buzzes again for
10 seconds in
every 15minutes.
Open the lid to
deal with faults,
then close the
lid to stop the
alarm.
Alarm for
water inlet
Checked imbalance for
the third time.
Stopping alarm
Drain off water 10 mins not
arrive at empty water level.
Note:The program which has E4 alarm when shocked in the first time is “Air dry” and Tub clean”.
“
W h i l e s p i n n i n g o r d e l a y
function
starts, there will
be an alarm if open the lid,
and only to be suspended
w i t h o u t a l a r m i n g i n t h e
spinning
process
.
Summary of Contents for WTAU12AW
Page 1: ...WTAU12AW ...