Beko WMD 78144, Installation & Operating Instructions And Washing Guidanse

Page: 18 / 40

EN
18
means higher power consumption.
C
For further program details, see
“Program Selection Table”
Special programs
For specific applications, select any of
the following programs:
• Rinse
This program is used when you want to
rinse or starch separately.
• Spin + Drain
This program spins with maximum
possible rpm in the default setting after
the water drains from the machine.
C
Use a lower spin speed for delicate
laundries.
Temperature selection
Whenever a new program is selected,
the temperature anticipated for that
program appears on the temperature
indicator (13b).
To change the temperature, press
the temperature button (Figure
2-9). Temperature decreases in 10°
increments.
Cold selection is shown with “-” symbol.
When the “Temperature” button is
pressed after Cold is selected, the
maximum temperature of the program
you have selected will be displayed.
To decrease the temperature, press the
“Temperature” button again.
90˚C
Normally soiled, white cottons and
linens. (Ex.: coffee table covers,
tablecloths, towels, bed sheets)
60˚C
Normally soiled, fade proof colored
linens, cottons or synthetic clothes
(Ex.: shirts, nightgowns, pajamas)
and lightly soiled white linen clothes
(Ex.: underwear)
40˚C
30˚C
Cold
Blended clothes including
synthetics and woolens as well as
delicates.
Economy Symbol
Shows energy saving programs and
temperature selections.
As "Intensive" and "Hygiene" programs
are long programs with higher
temperature selections to ensure
hygiene, “Economy” Symbol (Figure
3-13g) will not light up.
e
Spin Speed selection
Whenever a new program is selected,
the maximum spin speed of the selected
program is displayed on the spin speed
indicator (Figure 3-13a).
To decrease the spin speed, press
the “Spin” button (Figure 2-7). Spin
speed decreases gradually. Then, rinse
hold and no spin options are shown
respectively.
Rinse hold is shown with “ ” and no
spin is shown with “ ” symbols.
e
If you are not going to unload your
clothes immediately after the cycle, you
may use rinse hold function in order to
prevent your clothes become wrinkled
when there is no water in the machine.
With this function, your laundry is kept in
the final rinsing water. If you want to spin
your laundry after the rinse hold function:
- Adjust the spin speed.
- Press “Start/Pause/Cancel” button.
Program resumes. Your machine
drains the water and spins your
laundry.
You can use no spin function in order to
drain the water without spinning at the
end of the program.