Beko WMD 78144, Installation & Operating Instructions And Washing Guidanse

Page: 20 / 40

EN
20
Auxiliary functions
Auxiliary Function Selection Buttons
• Depending on the program, you can
select the desired auxiliary function
by pressing the buttons 11a, 11b,
11c,11d.
• Select the required auxiliary
functions before starting the
program.
• Some combinations cannot be
selected together. Ex.: Pre-wash
(Figure 2-11a) and Quick Wash
(Figure 2-11b).
• Symbol of the selected auxiliary
function (Figure 3-13l) will light up.
Auxiliary function selection
If an auxiliary function that should not
be selected together with a previously
selected function is chosen, the first
selected function will be cancelled and
the last auxiliary function selection will
remain active.
Ex.: If you want to select pre-wash first
and then quick wash, pre-wash will be
cancelled and quick wash will remain
active.
Auxiliary function that is not compatible
with the program cannot be selected.
(see, “Program Selection Table”)
• Prewash
When you select this function (11a), the
display will indicate "F1" symbol.
• A pre-wash is only worthwhile for
heavily soiled laundry. Without
pre-wash you save energy, water,
detergent and time.
• Pre-wash without detergent is
recommended for lace and curtains.
• Quick Wash
With this function (11b), the wash time is
shortened. "F2” symbol lights up on the
display.
• Use this function for smaller
amounts or slightly soiled laundries.
• Extra Rinse
When this function (11c) is selected,
washing and rinsing is performed with
plenty of water. "F3” symbol lights up on
the display.
• Plus water
When this function is selected, washing
and rinsing is made with plenty of water
in “Cottons”, “Synthetics”, “Delicates”
and “Woolens” programs.
C
Use this function for delicate
laundries that crease easily.
C
Whenever you select this auxiliary
function, load your machine with half
of the maximum laundry specified in
the program table.
• Anti - Crease
With this function (11d), drum
movement will be lessened to prevent
creasing and spinning speed is limited.
In addition, washing is carried out at a
higher water level. "F4” symbol lights up
on the display.
• Use this function for delicate
laundries that crease easily.
C
Whenever you select this auxiliary
function, load your machine with half
of the maximum laundry specified in
the program table.
Time display
The display shows the time remaining
for the program to complete while a
program is running. Time is displayed in
hours and minutes as “
01:30
”.
Time delay
With the “Time delay” function you can
delay the program start up to 24 hours.
Setting can be made in intervals of 30
minutes.