Beko WMC126W, Installation And Operating Instructions Manual

Page: 27 / 40

27
EN
programme will start depending on
the step the previous programme was
cancelled in. For example, it may take in
additional water or continue to wash with
the water inside.
Depending on the step where the
programme was cancelled in, you may
have to put detergent and softener
again for the programme you have
selected a new.
Your machine is equipped with
a “Standby Mode”
In case of not starting any programme or
waiting without making any other operation
when the machine is turned on by On/Off
button and while it is in selection step or if
no other operation is performed approximately
2 minutes after the programme you selected
has come to an end,your machine will
automatically switch to energy saving mode.
Display brightness will decrease. In case of
rotating the Programme Selection knob or
pressing any button, lights will restore to their
previous condition. This is not a fault.