35 / EN
Washer-Dryer / User’s Manual
Detergent residue in the detergent drawer. (**)
• Detergent was put in wet drawer. >>> Dry the detergent
drawer before putting in detergent.
• Detergent has gotten damp. >>> Keep detergents closed in
an environment free of humidity and do not expose them to
excessive temperatures.
• Water pressure is low. >>> Check the water pressure.
• The detergent in the main wash compartment got wet
while taking in the prewash water. Holes of the detergent
compartment are blocked. >>> Check the holes and clean if
they are clogged.
• There is a problem with the detergent drawer valves. >>> Call
the Authorised Service Agent.
• Detergent was mixed with the softener. >>> Do not mix the
softener with detergent. Wash and clean the drawer with hot
water.
There is detergent left on the laundry. (**)
• Excessive laundry was loaded in. >>> Do not load the machine
in excess.
• Wrong programme and temperature were selected. >>>
Select the proper programme and temperature for the laundry
to be washed.
• Wrong detergent was used. >>> Select the proper detergent
for the laundry to be washed.
Too much foam forms in the machine. (**)
• Improper detergents for the washing machine is used. >>>
Use detergents appropriate for the washing machine.
• Excessive amount of detergent is used. >>> Use only sufficient
amount of detergent.
• Detergent was stored under improper conditions. >>>
Store detergent in a closed and dry location. Do not store in
excessively hot places.
• Some meshed laundry such as tulle may foam too much
because of their texture. >>> Use smaller amounts of
detergent for this type of item.
• Detergent was put in the wrong compartment. >>> Put the
detergent in the correct compartment.
• Softener is being taken early. >>> There may be problem
in the valves or in the detergent drawer. Call the Authorised
Service Agent.
Foam is overflowing from the detergent drawer.
• Excessive amount of detergent is used. >>>>Mix 1
tablespoonful softener and ½ L water and pour into the main
wash compartment of the detergent drawer.
• Put detergent into the machine suitable for the programmes
and maximum loads indicated in the “Programme and
consumption table". When you use additional chemicals (stain
removers, bleaches and etc), reduce the amount of detergent.
Laundry remains wet at the end of the programme.
(*)
• Excessive foam has occurred and automatic foam absorption
system has been activated due to too much detergent usage.
>>> Use recommended amount of detergent.
(*) Machine does not switch to spinning step
when the laundry is not evenly distributed
in the drum to prevent any damage to the
machine and to its surrounding environment.
Laundry should be rearranged and re-spun.
(**) Regular drum cleaning is not applied.
>>> Clean the drum regularly. See 6.2
A
CAUTION!
• If you cannot eliminate the problem
although you follow the instructions in
this section, consult your dealer or the
Authorised Service Agent. Never try to
repair a nonfunctional product yourself.
Drying lasts too long.
• Excessive laundry loaded. >>>
Do not load the machine
in excess.
• Laundry is not spun enough.>>>
Spin at a higher spin
speed in washing step in the Dryer-Washing Machine.
• Tap is turned off. >>>
Turn on the taps.
Laundry is still damp after drying.
• An appropriate programme according to laundry
type might is not selected.>>>
Check care labels on
clothes and select an appropriate programme or use timed
programmes in addition.
• Excessive laundry loaded. >>>
Do not load the machine
in excess.
• Laundry is not spun enough.>>>
Spin at a higher spin
speed in washing step in the Dryer-Washing Machine.
Machine does not start or programme cannot be
started.
• Power cable is not connected. >>>
Make sure the power
cable is connected.
• Programme is not set or Start / Pause / Cancel button
is not pressed. >>>
Make sure the programme is set and
it is not in Stand-by mode.
• Child lock enabled. >>>
Disable Child lock.
Laundry is shrunken, pale, matted or damaged.
• An appropriate programme according to laundry type
is not selected.>>>
Check care labels on clothes and
select an appropriate programme or use timed programmes
in addition. You must not dry clothes that are not suitable for
drying.
Machine does not dry.
• Laundry is not dried or drying step is not enabled. >>>
Check if drying function is selected after the selected washing
programme.
Loading door cannot be opened.
Your machine’s door is not opened for safety
reasons.>>>
If door locked indicator is still active on display
after drying, machine keeps the loading door locked until it
cools for your safety.
