Beko WDIX8543100 User Manual Download Page 63

Page: 63 / 84

User’s Manual

63 / EN

Maintenance and cleaning

Discharging the water when the product does not have an emergency draining hose:

a. Place a large container in front of the filter to catch water from the filter.
b. Loosen pump filter (anticlockwise) until water starts to flow. Fill the flowing water

into the container you have placed in front of the filter. Always keep a piece of

cloth handy to absorb any spilled water.

c. When the water inside the machine is finished, take out the filter completely by

turning it.

3. Clean any residues inside the filter as well as fibers, if any, around the pump

impeller region.

4. Install the filter.
5. If the filter cap is composed of two pieces, close the filter cap by pressing on the

tab. If it is one piece, seat the tabs in the lower part into their places first, and

then press the upper part to close.

Summary of Contents for WDIX8543100





















































































Search results

Summary of Contents for WDIX8543100

Reviews:

Related manuals for WDIX8543100

Brands by name

Popular brands

Beko WDIX8543100, User Manual

Search results

Summary of Contents for WDIX8543100

Reviews:

Related manuals for WDIX8543100

Brands by name

Popular brands