Beko WDIX8543100 User Manual Download Page 18

Page: 18 / 84

18 / EN

Washer-Dryer

Installation

To make the product ready for use, review the information in the user manual and

make sure that the electricity, tap water supply and water drainage systems are

appropriate. If they are not, call a qualified technician and plumber to have any

necessary arrangements carried out.

DANGER!

Make sure that the installation and electrical

connections of the product are performed by

competent persons. Manufacturer shall not be held

liable for damages that may arise from procedures

carried out by unauthorised persons.

DANGER!

Your product is too heavy for one person to carry.

CAUTION

• Prior to installation, visually check if the product

has any defects on it. If so, do not have it installed.

Damaged products cause risks for your safety.

PRECAUTION

• Preparation of the location and electrical, tap water and

waste water installations at the place of installation is

under customer's responsibility.

• Make sure that the water inlet and discharge hoses as

well as the power cable are not folded, pinched or crushed

while pushing the product into its place after installation

or cleaning procedures.

Summary of Contents for WDIX8543100





















































































Search results

Summary of Contents for WDIX8543100

Reviews:

Related manuals for WDIX8543100

Brands by name

Popular brands

Beko WDIX8543100, User Manual

Search results

Summary of Contents for WDIX8543100

Reviews:

Related manuals for WDIX8543100

Brands by name

Popular brands