Beko UDW601, Instruction Manual

Page: 16 / 17

Code Symptom Cause What To Do
E1 Longer fill time Faucet is not opened Ensure the inlet hose is not
crushed
E2 Longer or Extended
draining time
The drain pipe was placed
too high when it was installed.
Ensure the drainage system is as
per the manual and not extended.
E3 Longer heating time- not
reaching required temperature
Malfunction of temperature
sensor or of heating element Call a qualified service technician.
E4 Overfilled
Too much inlet water.
Upper spray arm fouling on
crockery in lower basket
Dirty Filter
Trapped hoses
Machine not level
Overdosing. 3-in-1 tablets put
in with salt and/or rinse aid in the
appliance= overdose.
Adjust basket height or re-stack
crockery
Check filter is clean
Check inlet and drainage hoses
are not kinked or trapped.
Adjust level as per the
installation manual
E6 Open Circuit Thermistor
Call a qualified service
technician
E7 Short Circuit Thermistor Call a qualified service technician
Warning !
If an overflow occurs, turn off the main water supply before calling a service technician. If there is water in the
base of the tank pan because of an overfill or small leak, the water should be removed before restarting the
dishwasher.
13