The filter prevent larger remnants of food or other objects from getting inside the pump. This residue can
occasionally clog up the filters.
The filter system consists of a filter cylinder(Coarse filter),
A flat (Main filter) and a microfilter(fine filter).
Main filter
Food and soil particles trapped by this filter are pulverized by a
special jet on the lower spray arm and washed down the
drain.
Coarse filter
Larger items, such as pieces of bone or glass, that could clog
the drain are trapped in the coarse filter. To remove an item
caught in this filter, gently squeeze the taps on the top of this
filter and lift it out.
Fine filter
This filter holds soil and food residue in the sump area and
prevents it from being redeposit on the dishes during a cycle.
- Inspect the filters for obstructions every time the dishwasher has been used.
- By unscrewing the filter cylinder.you can remove the filter system.Remove any food remnants and clean the
filters under running water.
1
2
3
1
2
3
1
2
3
step
1:
contrarotate the filter
cylinder, and then lift it up;
step
2:
lift the Main filter up
step 3
:
lift the Fine filter up
If do it from step1 to step 3, the filter system will be removed; while if do it from step3 to step 1, the filter system
will be installed.
NOTE
:
If your dishwasher is left in an unheated place during the winter, ask a service technician to:
Cut off electrical power to the dishwasher. Remove
fuses or trip circuit breaker.
Turn off the water supply and disconnect the water
inlet pipe from the water valve.
Drain water from the inlet
and water valve.
pipe
(Use a pan to catch the water.)
Reconnect the water inlet
to the
water valve.
pipe
Remove the plastic sump cover in the
tub bottom and use a sponge to soak
up water in rubber boot.
5
4
3
2
1
Unscrew
9
Summary of Contents for UDW601
Page 17: ...14 ...