79 / EN
Washer-Dryer / User Manual
If the water level in the machine is not suitable
when you press the
Start/Pause
button, the
panel will warn you that the door is closed.
5.17.2 Switching the
machine to pause mode
Press the
Start/Pause
button to switch the
machine to pause mode.
5.17.3 Changing the
programme selection after
the programme has started:
If Child Lock is not enabled, you can change
programme while the current one is running.
This will cancel the current programme.
C
INFORMATION
• The newly selected programme will start
anew.
5.17.4 Changing the auxiliary
function, spin speed and
temperature settings
Depending on the step the programme has
reached, you can cancel or select auxiliary
functions. See “Auxiliary function selection”.
Also, you can change the spin speed,
temperature and drying settings. See "Spin
speed selection" and "Temperature selection".
C
INFORMATION
• If the temperature of the water inside the
machine is high or if the water level is above
the door line, the loading door will not open.
5.18 Cancelling the programme
The programme will be cancelled if the
programme selection knob is switched to
another programme or if the machine is
switched off and on with this button.
C
INFORMATION
• The programme will not be cancelled if you
turn the programme selection knob while
child lock is enabled. You should cancel the
Child Lock first.
• If you want to open the loading door after
you have cancelled the programme but
you cannot do it since the water level in the
machine is above the loading door baseline,
turn the Programme Selection knob to
Pump+Spin programme and discharge the
water in the machine.
5.19 End of programme
Once the programme is completed, the End
symbol will be displayed.
If you do not press any button for 10 minutes,
the machine will switch to OFF mode. Display
and all indicators are turned off.
If you press any button, the completed
programme steps will be displayed.
5.20 Your machine has the
"Pause Mode" function.
After using the On/Off button to switch on the
machine, if you do not start any programme in
the selection step or do not perform anything
else, or if you do not do anything in 2 minutes
after the selected programme has ended, the
programme will automatically switch to energy
saving mode. Also, if your product has a display
that shows programme time, this display will be
completely turned off. If you turn the programme
knob or touch any button, the lights will switch
back to previous position. The selections you
make when exiting the energy efficiency mode
may change. Check if your selections are correct
before starting the programme. If necessary,
make adjustments again. This is not an error.
