22/EN
Assembling the burner parts
1
Burner cap
2
Burner head
3
Burner chamber
4
Injector
5
Spark Plug (in products with igniter)
6
Thermic element (in products with thermic
element)
1.
Place the burner head ensuring that it passes
through the burner spark plug (4). Turn the burner
head right and left to make sure that it is seated in
the burner chamber.
2.
Place the burner cap on the burner head.
Cleaning the control panel
•
When cleaning the panels with knob control, wipe
the panel and knobss with a damp soft cloth and
dry with a dry cloth. Do not remove the knobs and
gaskets underneath to clean the control panel. The
control panel and knobs may be damaged.
•
While cleaning the inox panels with knob control, do
not use inox cleaning agents around the knobs. The
indicators around the knobs may be deleted.
•
Clean the touch control panels with a damp soft
cloth and dry with a dry cloth. If your product has a
key lock feature, set the key lock before performing
control panel cleaning. Otherwise, incorrect
detection may occur on the keys.
In case of any overflow, turn off the burner
immediately. Remove the pots and pan supports on
it. Clean the overflowed material with a dry and
absorbent cloth. Pay attention not to let liquids enter
into burners. Clean inside of the burners as well if
any liquid has entered. Do not re-operate the hob
before cleaning it.
