Built-In Hob / User Manual
20 / 22 EN
7
Maintenance and care
7.1 General information
Service life of the product will extend and the
possibility of problems will decrease if the product
is cleaned at regular intervals.
A
WARNING:
Disconnect the product from mains
supply before starting maintenance
and cleaning works.
There is the risk of electric shock!
A
WARNING:
Allow the product to cool down
before you clean it.
Hot surfaces may cause burns!
•
Clean the product thoroughly after each use.
In this way it will be possible to remove cooking
residues more easily, thus avoiding these from
burning the next time the appliance is used.
•
No special cleaning agents are required for
cleaning the product. Use warm water with
washing liquid, a soft cloth or sponge to clean
the product and wipe it with a dry cloth.
•
Always ensure any excess liquid is thoroughly
wiped off after cleaning and any spillage is im-
mediately wiped dry.
•
Do not use cleaning agents that contain acid or
chloride to clean the stainless or inox surfaces
and the handle. Use a soft cloth with a liquid de-
tergent (not abrasive) to wipe those parts clean,
paying attention to sweep in one direction.
C
The surface might get damaged
by some detergents or cleaning
materials.
Do not use aggressive detergents,
cleaning powders/creams or any
sharp objects during cleaning.
Do not use harsh abrasive cleaners
or sharp metal scrapers to clean
the oven door glass since they can
scratch the surface, which may
result in shattering of the glass.
C
Do not use steam cleaners to clean
the appliance as this may cause an
electric shock.
7.2 Cleaning the hob
Gas hobs
1. Remove and clean the saucepan carriers and
burner caps.
2. Clean the hob.
3. Install the burner caps and make sure that they
are seated correctly.
4. When installing the upper grills, pay attention to
place the saucepan carriers so that the burners
are centered.
Glass ceramic surfaces
Wipe the glass ceramic surface using a piece of
cloth dampened with cold water in a manner as
not to leave any cleaning agent on it. Dry with a
soft and dry cloth. Residues may cause damage on
the glass ceramic surface when using the hob for
the next time.
Dried residues on the glass ceramic surface should
under no circumstances be scraped with hook
blades, steel wool or similar tools.
Remove calcium stains (yellow stains) by a small
amount of lime remover such as vinegar or lemon
juice. You can also use suitable commercially
available products.
If the surface is heavily soiled, apply the cleaning
agent on a sponge and wait until it is absorbed
well. Then, clean the surface of the hob with a
damp cloth.
C
Sugar-based foods such as thick
cream and syrup must be cleaned
promptly without waiting the
surface to cool down. Otherwise,
glass ceramic surface may be
damaged permanently.
Slight color fading may occur on coatings or other
surfaces in time. This will not affect operation of
the product.
Color fading and stains on the glass ceramic
surface is a normal condition, and not a defect.
Summary of Contents for HISW 72225 SOB
Page 23: ......
Page 24: ...www beko com ...
