Beko HISW 72225 SOB, User Manual

Page: 12 / 24

Built-In Hob / User Manual
12 / 22 EN
3 Installation
3. Intensive and prolonged use of the appliance
may necessitate supplemental ventilation, e.g.
opening a window or increasing the power of
the air intake system (if present)
4. Liquefied petroleum gases are heavier than
air and as a result, settle downwards. Rooms
in which LPG tanks are installed must be fitted
with ventilation openings to the outside in
order to allow the gas to escape in the event
of a leak. Therefore, LPG tanks, whether empty
or partially full, must not be installed or stored
in rooms or spaces below ground level (cellars,
etc.). It is also a good idea to keep only the
tank currently being used in the room, making
sure that it is not near sources of heat (ovens,
fireplaces, stoves, etc.) that could raise the
internal temperature of the tank above 50 ºC.
3.2 Installation of Built-In
cooktops
The appliance can be installed next to furniture
units which are no taller than the top of the cooker
hob. The wall in direct contact with the back panel
of the cooker must be made of non-flammable
material. During operation the back panel of the
cooker could reach a temperature of 500C above
room temperature. For proper installation of the
cooker, the following precautions must be taken:
If the cabinet (s) located next to the cooktop
are higher than the cooktop itself, the cabinet
(s) must be installed at least 600 mm from the
edge cooktop; Hoods must be installed in the
accordance with the instructions contained in the
installation manual for the hoods themselves, and
no less than 650 mm from the cooktop.