18
GB
If you want to reassemble the cutlery
basket, the reverse of the above
operations should be carried out.
Part A can not be placed in the upper
basket.
Long cutlery, such as ladles and
carving knives, should not be placed
in the upper basket parts B or C. They
can be placed on the side racks on the
upper basket horizontally.
In order to obtain the best cleaning and
drying performance in cutlery basket,
use the separators of parts A, B and C.
To remove the separators follow the
below instructions
For Part A ;
Press to release catches on sides and
the separators can be pulled off.
For Parts B and C;
Press to release catches on sides and
the separators can be pulled off.
Three-way split cutlery basket
Depending on the amount of load
and load type, three-way split cutlery
basket can be split into three parts.
Part B and/or part C can be placed in
the upper basket.
To dismantle the three-way split cutlery
basket follow the below instructions
and see the diagrams supplied.
Rotate handgrip which is at the bottom
of handle.
Remove top and bottom hangers by
sliding each part in opposite direction.
�
�
�
�
�
�
�
Place larger items such as saucepans
in the lower basket.
You can remove the cutlery basket
to make room for other items .Place
spoons and forks in the cutlery basket
with handles down and knives with
handles up to prevent accidental injury.
Warning !
Long cutlery, such as ladles and
long knives, etc must be placed
horizontally on top of the full cutlery
basket or on the racks to prevent
accidental injury.
Handle of the cutlery basket is not
removable
Summary of Contents for DWD8667
Page 1: ... Dishwasher DWD 8667 ...
Page 34: ... ...
