Proper use
10
DRYPOINT® RS 15-550 HP50 NA
Note!
Contaminated intake air!
In the event that the intake air is strongly contaminated (ISO 8573.1 class 3.-3 or poorer quality), we recommend the
additional installation of a prefilter (e.g. CLEARPOINT HP50S040), to avoid clogging of the heat exchanger.
Caution!
Heating-up through fire!
In the event of a heating-up through fire, the containers and pipes of the refrigerant system can
burst.
In this case, please proceed as follows:
Switch off the refrigeration plant.
Switch off the mechanical ventilation of the machinery compartment.
Use ambient-air-independent respirators.
Containers and plants which are filled with refrigerant can burst violently in the event of fire.
The refrigerants themselves are incombustible, but they are degraded to very toxic products at high
temperatures.
Remove the container/plant from the fire zone, as there is the risk of bursting!
Cool down containers and bottles via a directed water jet from a safe position.
In the event of fire, please use an approved fire extinguisher. Water is not a suitable agent to extinguish
an electrical fire.
This must only be carried out by persons who are trained and informed about the hazards emanating
from the product.
Caution!
Unauthorised intervention!
Unauthorised interventions may endanger persons and plants and lead to malfunction.
Unauthorised interventions, modification and abuse of the pressure devices are prohibited.
The removal of sealings and leadings at safety devices is prohibited.
Operators of the devices must observe the local and national pressure equipment regulations in the
country of installation.
Pos : 8 / Beko Tec hnisc he Dokument ati on/Sic herheit/ Sicher heits hi nweis e, weit ere BM (nic ht Ex) @ 0 \ mod_1183616103770_6. doc @ 4009os : 9 / Beko Tec hnisc he D okument ati on/Sic herheit/Z us atz Sic her hei tshi nweise BM 33 @ 0\ mod_1231926887620_6. doc @ 12829s: 10 / Beko Tec hnis che D okument ati on/Sic her heit/ Vorsic ht Fehlf unktion @ 0\ mod_1214378096290_6.doc @ 9359
Note!
Ambient conditions!
In the event that the dryer is not installed under suitable ambient conditions, the ability of the device to
condense refrigerant gas is impaired. This can result in a higher load of the refrigerating compressor, and
in a loss of efficiency and performance of the dryer.
This in turn leads to overheated condenser fan motors, to malfunction of electric components and to a
breakdown of the dryer. Failures of this type will affect warranty considerations.
Do not install the dryer in an environment in which chemicals with a corrosive effect, explosive gases,
toxic gases, evaporation heat, high ambient temperatures or extreme dust and dirt can be found.
Pos : 12 /Beko T ec hnis che D okument ati on/Übersc hriften/ 1/ Besti mmungsgemäße Ver wendung @ 0 \mod_1183637706293_6. doc @ 5383
3
Proper use
This dryer was designed, manufactured and tested to separate the moisture which normally exists in compressed air.
Any other use is considered improper.
The manufacturer shall not be liable for problems occurring as a consequence of improper use. The user alone is
responsible for any damage resulting from that.
Furthermore, the correct use includes the compliance with the installation instructions, in particular in respect of:
• The voltage and frequency of the main voltage supply.
• The pressure, temperature and flow rate of the inlet air.
• The pressure, temperature and cooling-water throughput (water-cooled).
• The ambient temperature.
When delivered, the dryer is tested and fully assembled. The customer only needs to connect the device to the system
in accordance with the instructions in the following chapters.
Pos : 15 /Beko T ec hnis che D okument ati on/Übesc hrift en/1/Aussc hluss vom Anwendungs bereic h @ 0 \ mod_1236003439359_6. doc @ 13709
4
Exclusion from a field of application
Pos : 16 /Beko T ec hnis che D okument ati on/Besti mmungsgemäß e Ver wendung/ BEKOM AT/ Aus schl uß Anwendung BM 31/ 32/33 @ 0\ mod_1236003837511_6.doc @ 13736
Note!
Improper use!
The device is intended for the separation of water in compressed air. The dried air cannot be used for
breathing-air purposes and is not suitable for the direct contact with food.
This dryer is not suitable for the treatment of contaminated air or of air containing solids.
Summary of Contents for DRYPOINT RS 100-E HP50 NA
