Beko DPHR8PB561, User Manual

Page: 33 / 40

33 / EN
Dryer / User Manual
8 Troubleshooting
Drying operation takes too long.
• Fibre filter (interior and exterior filter) pores may be clogged. >>> Wash the fibre filters
with warm water and dry.
• Evaporator front side may be clogged. >>> Clean the front side of the evaporator.
• The ventilation grills in front of the machine may be closed. >>> Remove any object in
front of the ventilation grills that blocks air.
• Ventilation may be inadequate because the are the machine is installed in is too small.
>>> Open the door or windows to prevent the room temperature from rising very high.
• A lime layer may have accumulated on the humidity sensor. >>> Clean the humidity
sensor.
• Excessive amount of laundry might be loaded. >>> Do not load the drying machine
excessively.
• Laundry might not have been wrung adequately. >>> Perform a higher speed wringing
on the washing machine.
Clothes come out damp after drying.
C
Laundry that comes out at the end of the drying process feels more humid than it
actually is.
• A program not suitable for the laundry type may have been used.>>> Check the
maintenance labels on the clothes and select a program suitable for the clothes’ type or
use time programs as extra.
• Fibre filter (interior and exterior filter) pores may be clogged. >>> Wash the filters with
warm water and dry.
• Evaporator front side may be clogged. >>> Clean the front side of the evaporator.
• Excessive amount of laundry might be loaded. >>> Do not load the drying machine
excessively.
• Laundry might not have been wrung adequately. >>> Perform a higher speed wringing
on the washing machine.
Drying machine does not turn on or program cannot be started. Drying machine does not
run after it is configured.
• Power plug might be unplugged. >>> Make sure the power cord is plugged in.
• Loading door might be open. >>> Ensure that the loading door is properly closed.
• A program might not be set or Start / Pause /Cancel button might not be pressed. >>>
Check that the program is set and it is not in Pause position..
• Child lock may be activated. >>> Turn off the child lock.
Program terminated prematurely for no reason.
• Loading door might be closed completely. >>> Ensure that the loading door is properly
closed.
• There might be a power outage. >>> Press the Start / Pause / Cancel button to start the
program.
• Water tank may be full. >>> Empty the water tank.
Clothes have shrunk, hardened or spoiled.
• A program not suitable with the laundry type might have been used. >>> Check the
maintenance labels on the clothes and select a program suitable for the clothes.