Beko DPHR8PB561, User Manual

Page: 27 / 40

27 / EN
Dryer / User Manual
Operating the product
6.10 Program progress status
6.11 Child Lock
The machine has a child lock which prevents
the program flow from being interrupted
when the buttons are pressed during a pro-
gram. To activate the child lock
• Press and hold time programs and audio
warning buttons for 3 seconds.
• When the child lock is activated, the lock
symbol on the screen turns on.
• When the child lock is activated, all
buttons on the panel except the On/
Off/Cancel and Child Lock buttons are
deactivated.
• When the child lock is activated, indicator
symbols don’t change if the position of
Program Selection button is changed.
When Program Selection button is turned
and function buttons are pressed, the
letters “CL” flashes on the screen.
• Select drying program, spin cycle and if
needed, additional functions.
• Press the End Time selection button and
set the delay time you wish. End Time
symbol turns on. (When pressed and
hold the button, End Time proceeds non-
stop).
• Press the Start / Stand-by button. End
time countdown starts and Start symbol
turns on. “:” Separator in the middle of
displayed delay time flashes.
C
You can add or remove laundry
within end time. End Time
symbol will turn off at the end
of countdown, drying starts and
duration of program is displayed.
Displayed time is the sum of
normal drying time and end time.
Changing the end time
If you want to change the duration during
the countdown:
• Press the On/Off/Cancel button for 3
seconds to cancel the program. Turn on
the machine again and repeat the Delay
Setting process for the duration you wish.
• When your machine is turned on for the
first time, it turns on with the declaration
program (cotton wardrobe dry).
Cancelling the end time function
If you want to cancel the end time count-
down and start the program immediately:
• Press the On/Off/Cancel button for 3
seconds to cancel the program.
• Press the On/Off/Cancel button to start
you previously selected program.
6.9 Starting the program
Press the Start/Stand-by button to start
the program.
Indicating start of the program, Start sym-
bol turns on, “:” separator in the middle of
remaining time keeps flashing. Program
Progress Symbol turns on.