34/EN
3. Set the desired time by pressing the
Time Delay key. Time will increase with
increments of 30 minutes up to 6 hours
and after that in 1 hour increments up
to 24 hours every time you press the
key.
4. Press Start / Pause / Cancel key to
start countdown for the Time Delay.
Time Delay indicator and Start / Pause
indicator will light continuously until
the end of the period. Time Delay is
displayed on the Display Information
Line. Selected programme will start as
soon as the countdown is over.
Changing the settings while Time
Delay function is enabled
While the Time Delay function is activated,
you cannot make changes in the washing
programme, auxiliary functions or the
duration of delay time.
Programme and auxiliary functions
cannot be set/changed after the
programme has started.
To cancel the Time Delay function
1. Press and hold Start / Pause / Cancel
key for 3 seconds.
2. When the Start / Pause / Cancel key is
pressed and hold, "3", "2", "1" appear
on the Display Information Line. Time
Delay indicator will turn off at the end of
the cancellation process and delaying
process is cancelled.
You can select and start a new
programme following the cancellation
of Time Delay function.
Time Delay function can not be set
after the programme starts.
Starting the programme
To start your machine after selecting the
programme and auxiliary functions, press
Start / Pause / Cancel key.
Once the programme starts a tune is
played and the estimated time remained to
the end of the programme will appear on
the Display Information Line. Start / Pause /
Cancel indicator starts lighting continuously.
Your machine performs water softening
depending on the hardness level of
the supply water. Remaining time
displayed towards the end in some
programmes can be different from the
time indicated at the beginning due to
this process. The total time can also
change while the programme is running
depending on the ambient temperature
where your machine is installed,
temperature of the supply water and
amount of the dishes.
Pay attention not to open the door
of the machine when it is running.
Stop the machine by pressing Start
/ Pause / Cancel key if you have to
open the door. Then, open the door of
the machine. There may be a rush of
steam when you open the door of your
machine; be careful. Close the door of
your machine and press Start/Pause/
Cancel key again. Programme will
resume running.
The machine will remain silent in
pause mode for some time in order to
remove the water in the machine and
on the dishes completely and to have
the water softener cleaned, and then it
will resume running in drying mode.
Child (Key) Lock
You may prevent other people from
interrupting and changing the programme
cycle and time delay while the machine is
running.
To activate the Child Lock:
1. Pres Child (Key) Lock keys
simultaneously and hold for 3 seconds.
2. "3", "2", "1" is displayed on Display
