Beko DCY 8502 XB1, User Manual

Page: 21 / 28

Dryer / User Manual
21 / 28 EN
O perating the product
Cleaning the condenser
Warning symbol flashes with certain intervals to remind
that the condenser needs to be cleaned.
Loading door open
This warning symbol Pause appears and programme
progress symbol flashes when the loading door of the
dryer is open.
End time
With the End Time
function, the end time of the pro-
gramme may be delayed up to 24 hours.
1. Open the loading door and put the laundry in.
2. Select the drying programme, spin speed and, if
required, the auxiliary functions.
3. Press
End time
button to set the desired time delay.
End time
symbol flashes on the display. (When the
button is pressed on,
End time
proceeds continu-
ously)
4. Press
Start / Pause
button.
End time
starts count-
down and
Start
symbol lights up on the display. The
“:” in the middle of the displayed delay time flashes.
C
Additional laundry may be loaded / taken
out during the End time. At the end of
the countdown process, end time symbol
disappears, drying process starts and the
programme duration is displayed. The
time on the display is the total of normal
drying time and end time.
Changing the End time
If you want to change the time during countdown:
1. Press
On/Off/Cancel
button for 3 seconds to can-
cel the programme. Restart the machine and repeat
the Delay Setting procedure for the desired time.
2. When your machine is operated for the first time,
it starts with the declaration programme (wardrobe
dryness for cottons.
Cancelling the end time
If you want to cancel the End time countdown and start
the programme immediately:
1. Press On/Off/Cancel button for 3 seconds to can-
cel the programme.
2. Press On/Off/Cancel button to start the pro-
gramme you have previously selected.
5.10 Starting the programme
Press the
Start/Pause
button to start the program.
Start
symbol will light up to indicate that the pro-
gramme has started and ":" symbol in the middle of the
remaining time will keep flashing. Progress of Programme
Symbol flashes on the screen.
5.11.Progress of programme
5.12 Child Lock
Machine is equipped with a Childproof Lock which
prevents interfering with the current programme flow
by pressing any button. All buttons except the
On/Off/
Cancel
button on the control panel are deactivated when
the Child-proof Lock is active.
In order to activate the Childproof Lock
, press Anti-
creasing button for 3 seconds.
To start a new programme after the current programme
is over or to interrupt the current programme, the Child-
proof Lock should be deactivated. Press the same button
for 3 seconds again to deactivate the Child-proof
Lock .
C
Lock symbol will appear on the display
when the Child-proof Lock is activated.