Dryer / User Manual
23 / 28 EN
•
Clean the entire inner surface of the loading door
and loading door gasket with a soft damp cloth.
6.2 Cleaning the sensor
There are dampness sensors in the dryer that detect
whether the laundry is dry or not.
To clean the sensors:
•
Open the loading doorof the dryer.
•
Allow the machine to cool down if it is still hot due
to the drying process.
•
Wipe the metal surfaces of the sensor with a soft
cloth, dampened with vinegar and dry them.
C
Clean metal surfaces of the sensors 4
times a year.
6
Maintenance and cleaning
Service life of product extends and frequently experi-
enced problems will be reduced if it is cleaned at regular
intervals.
6.1 Cleaning Lint Filter / Loading Door
Inner Surface
Lint and fiber released from the laundry to the air during
the drying cycle are collected in the Lint Filter.
C
Such fiber and lint are generally formed
during wearing and washing.
A
Always clean the lint filter and the inner
surfaces of the loading door after each
drying process.
C
You can clean the lint filter housing with a
vacuum cleaner.
To clean the lint filter:
•
Open the loading door.
•
Remove the lint filter by pulling it up and open the
lint filter.
•
Clean lint, fiber, and cotton raveling by hand or with
a soft piece of cloth.
•
Close the lint filter and place it back into its housing.
•
A layer can build up on the filter pores that can
cause clogging of the filter after using the dryer for a
while. Wash the lint filter with warm water to remove
the layer that builds up on the lint filter surface. Dry
the lint filter completely before reinstalling it.
Summary of Contents for DCY 8502 XB1
Page 1: ...DCY 8502 XB1 Dryer User Manual 2960310884_KM 070514 0837 ...
Page 27: ...Dryer User Manual ...
Page 28: ......
