Beko CWB 7441 X, User Manual

Page: 9 / 24

9 / 20 EN Hood / User Manual
2 Warnings - Components
Warnings
This appliance has been designed
for use as either an EXTRACTION
(ducting to the outside) or
RECIRCULATION (filtering) hood
The measurements contained on
the drawings in this booklet re-
fer to two models of cooker hood
Therefore, it is essential that you re-
fer to the correct drawing when tak-
ing measurements for installation
•
The minimum distance between
the cooking surface and the metal
grease filters on the underside of
the hood must be 650mm
•
This cooker hood must be installed
in accordance with the installation
instructions and all requirements
must be adhered to
•
If the room where the cooker
hood is to be used contains a fuel
burning appliance such as a central
heating boiler then its flue must
be of the room sealed or balance
flue type
•
If other types of flue or appliances
are fitted ensure that there is an
adequate supply of air to the room
•
When the range hood and
appliance supplied with energy
other than electricity are
simultaneously in operation, the
negative pressure in the room
must not exceed 4 Pa (4x10-5
bar)
•
The ducting system for this
appliance must not be connected
to any ventilation system which is
being used for any other purpose
•
The ducting system for this
appliance must not be connected
to any existing ventilation system
which is being used for any other
purpose
•
Do not leave naked flames or carry
out flambè cooking under this
cooker hood
•
This appliance is not intended
for use by persons (including
children) with reduced physical,
sensory or mental capabilities, or
lack of experience and knowledge,
unless they have been given
supervision or instruction
concerning use of the appliance
by a person responsible for their
safety
•
Children should be supervised to
ensure that they do not play with
the appliance