Beko CWB 7441 X, User Manual

Page: 10 / 24

10 / 20 EN Hood / User Manual
2 Warnings - Components
Connecting the power
cable to the mains
power supply
Before installation, check that the
mains voltage indicated on the rat-
ing plate inside the appliance cor-
responds to the voltage available in
your home If the Hood is not fitted
with a plug have a licensed electri-
cian, fit the power cable with a plug
of a type approved for the load in-
dicated on the rating plate; when
connecting directly to the mains,
insert an omni polar circuit breaker
with a minimum contact aperture of
3mm and a size suitable for the load
in question between the appliance
and the mains supply, making sure
it is of a type that complies with
current regulations
Components
•
2 No Wall Brackets C
•
1 No 150-120mm Ducting Spigot G
•
1 No Air Outlet Connection H
(Optional)
•
2 No Charcoal Filters L (Optional)