Beko CWB 7441 X, User Manual

Page: 6 / 24

6 / 20 EN Hood / User Manual
1 Recommendations and Suggestions
A
The Instructions for Use
apply to several ver-
sions of this appliance
Accordingly, you may find
descriptions of individual
features that do not apply
to your specific appliance
1.1 Installation
•
The manufacturer will not be held
liable for any damages resulting
from incorrect or improper
installation
•
The minimum safety distance
between the cooker top and
the extractor hood is 650 mm
(some models can be installed
at a lower height, please refer
to the paragraphs on working
dimensions and installation)
•
Check that the mains voltage
corresponds to that indicated on
the rating plate fixed to the inside
of the hood
•
For Class I appliances, check
that the domestic power supply
guarantees adequate earthing
•
Connect the extractor to the
exhaust flue through a pipe of
minimum diameter 120 mm The
route of the flue must be as short
as possible
•
Do not connect the extractor
hood to exhaust ducts carrying
combustion fumes (boilers,
fireplaces, etc )
•
If the extractor is used in
conjunction with non-electrical
appliances (e g gas burning
appliances), a sufficient degree
of aeration must be guaranteed
in the room in order to prevent
the backflow of exhaust gas The
kitchen must have an opening
communicating directly with the
open air in order to guarantee
the entry of clean air When the
cooker hood is used in conjunction
with appliances supplied with
energy other than electric, the
negative pressure in the room
must not exceed 0,04 mbar to
prevent fumes being drawn back
into the room by the cooker hood
•
In the event of damage to the
power cable, it must be replaced
by the manufacturer or by the
technical service department, in
order to prevent any risks