Beko BKP-09C, Service Manual, Page: 10 / 23

YES
NO
connect the teminator N,L and the control panel piece
well.
check if the connection between input tip of the transformer
and the electric control panel is good or not.
NO
connect it again
Check if the wire between the display board and the
electric control panel connected well.
connect it again
NO
check if the fuse is blown.
NO
change the fuse.
YES
check by a AVOmeter and see if the resistance between plug tip N and the
COM1 terminator is lower than 0.1Ω, or check if the resistance between
the plug tip L and the COM piece of COMP relay RY2 is lower than 0.01Ω.
YES
YES
The machine is powered on, but neither it run,
nor it display.
check if the terminator N,L of the power cord and
the control panel piece connected well.