Beko Bekoblizz LC 12-355, Instructions For Installation And Operation Manual

Page: 54 / 64

Appendices
54 BEKOBLIZZ® LC 12-355
13.3 Electric diagrams
13.3.1 Electric diagrams – list of components
MC : Compressor
KT
: Compressor thermal protection
KR
: Compressor starting relay (if installed)
CS : Compressor starting capacitor (if installed)
CR : Compressor operating capacitor (if installed)
MV : Condenser fan
CV : Fan starting capacitor (if installed)
DMC15 : DMC15 electronic instrument – air chiller control
BT1 : T1 Temperature probe – dew point
BT2 : T2 Temperature probe – fan control
DMC18 : DMC18 Electronic Instrument - Air chiller Controller
BT1 : T1 Temperature probe – dew point
HPS : Pressure switch – compressor discharge side (HIGH PRESSURE)
LPS : Pressure switch – compressor suction side (LOW PRESSURE)
PV : Pressure switch – fan control
TS : Safety temperature switch
ELD : BEKOMAT drain
S1 : ON/OFF switch
QS : Main switch with locking device
RC : Compressor crankcase heater
BOX : Electrical connection
NT1 : Only air-cooled
NT2 : Check the transformer connections with regard to the supply voltage
NT3
: Jump, if not installed
NT4
: Provided and cabled by the customer
NT5 : Internal control
NT6 : Time-controlled drain outlet (not used)
NT7 : Only water-cooled
BN = BROWN OR = ORANGE
BU = BLUE RD = RED
BK = BLACK WH = WHITE
YG = YELLOW/GREEN WH/BK = WHITE/BLACK