EN / 6
• When unplugging the appli-
ance, don't hold the power
cord, but the plug.
• Make sure the plug is not
wet, dirty or dusty.
1.4
Handling Safety
• Unplug the product before
moving, remove the water
outlet and water main con-
nections. Drain any water left
inside the product.
• This product is heavy, do not
handle it by yourself. Do not
hold extruding parts such as
the laundry loading door to lift
and move the product. The
upper tray should be tightly
fixed for moving.
• Your product is heavy; it
should be carried carefully by
two people if a staircase is in-
volved. It may cause injuries
if your product falls on you.
Do not hit and drop the
product while carrying.
• Carry the product in an up-
right position.
• Make sure that the hoses as
well as the power cable are
not folded, pinched or
crushed after the product is
fitted into its place after in-
stallation or cleaning proced-
ures.
1.5
Installation Safety
• Check the information on the
manual and installation in-
structions to prepare the
product for installation and
make sure the electrical
mains, clean water mains and
water outlet are suitable. If
not, call a qualified electrician
and plumber to have them
make the necessary arrange-
ments. These operations are
the responsibility of the cus-
tomer.
• Check for any damage on the
product before installing it. Do
not have the product installed
if it is damaged.
• Injuries may occur if hands
are put into uncovered slots.
Close the holes of the trans-
portation safety bolts with
plastic plugs.
• Do not install or leave the
product at locations where it
may be exposed to external
environment conditions.
• Do not install the product at
locations where the temperat-
ure drops below 0 ºC.
• Do not place the product on a
carpet or similar surface. It
would create fire hazard
since it cannot receive air
from underneath.
