EN / 41
Your washing machine will auto-
matically turn off if you cannot real-
ize the setup successfully within 5
minutes. In this case, you have to
start the setup process all over
again. If the problem continues,
please contact the Authorised Ser-
vice.
You can use your washing machine
with more than one smart device.
To do this, download the Home-
Whiz app on the other smart device
as well. When you launch the app,
you will need to log in with the ac-
count you previously created and
paired your washing machine. Oth-
erwise, please read "Setting up a
washing machine that is connected
to someone else's account".
You need internet connection on
your smart device to proceed with
HomeWhiz setup. Otherwise, the
HomeWhiz application will not let
you finish the setup procedure suc-
cessfully. Please contact your inter-
net service provider if you are hav-
ing problems with your internet con-
nection.
HomeWhiz Application may require
you to type the product number
shown on the product label. You
can find the product label inside of
the appliance door. The product
number is located on this label.
6.20.2 Setting up a Washing
Machine Connected to
Someone Else's Account
If the washing machine that you want to
use has been previously registered to the
system with someone else's account, you
need to establish a new connection
between your HomeWhiz App and the ap-
pliance.
a. Download HomeWhiz Application on the
new smart device you want to use.
b. Create a new account and log in to this
account on the HomeWhiz app.
c. Follow the steps described in Home-
Whiz Setup (HomeWhiz Setup) and pro-
ceed with the setup procedure.
Since the HomeWhiz Feature and
Remote Control function on your
appliance is operated via pairing
using Bluetooth technology only
one Homewhiz application can op-
erate it at a time.
6.20.3 Remote Control Function
and Using It
After HomeWhiz setup, bluetooth will auto-
matically turn on. To activate or deactivate
the Bluetooth connection, please see
“Bluetooth 3”.
If you turn off and on your machine while
bluetooth is active, it will automatically re-
connect. In cases such as paired device
going off the range, bluetooth will automat-
ically turn off. For this reason, you will need
to turn on the bluetooth again if you want to
use the Remote Control function.
You can check the bluetooth symbol on the
display to track your connection status. If
the symbol is continuously on, you have
bluetooth connection. If the symbol is flash-
ing, the product is trying to connect. If the
symbol is off, you have no connection.
